phone: 331-215-4119

Shelco

MICROVANTAGE™ MPX SERIES

(331) 215-4119
No reviews yet Write a Review
  • Safe Payments

  • Amazing Selection

Extended Life Absolute Rated Polypropylene Pleated Filter Cartridges – 99.98% Efficiency

  • Absolute Beta 5000 / 99.98% retention ratings from 0.2 to 50 microns
  • 7.0 square feet of media surface area designed for maximum throughput and particle retention at the lowest pressure drop
  • 100% polypropylene construction offers wide range of chemical compatibility
  • Rigid, molded cage protects pleated media and strengthens structural stability
  • Manufactured in Class 10,000 clean room for highest purity
  • Meets applicable CFR criteria and USP Class VI Biological Test for plastics

 

Applications

RO Prefilters              

Food & Beverage

Process Water            

Bottled Water

Plating Solutions        

Microelectronics

Chemicals                

Paint/Inks

Water & Wastewater

Cosmetics

More Options Available:
Contact Sales for Additional Options and Configurations
Pore Sizes:
0.2, 0.45, 1.0, 3.0, 5.0, 10.0, 20.0, 30.0, 40.0, 50.0 microns
Nominal Lengths:
9.75" (24.7 cm), 10" (25.4 cm), 20" (50.8 cm), 30" (76.2 cm), 40" (101.6 cm)
Outside Diameter:
2.67" (6.78 cm)
Inside Diameter:
1.0" (2.54 cm)
Media Surface Area:
7.0 sq. ft. (0.65 m2) per ten inches in length
Gaskets/O-rings:
Silicone, Buna N, EPR, Viton, Teflon Encapsulated Viton (o-rings only)
Materials of Construction:
Filter Media: Polypropylene Outer Cage / Core / End Caps: Polypropylene
Maximum Operating Temperature:
176F ( 80C)
Recommended Change-out Differential Pressure:
35 psid (2.4 bar)
Maximum Differential (Collapse) Pressure:
75 psid @ 70°F (5.2 bar @21°C), 40 psid @176°F (2.8 bar @ 80°C)
Sanitization and Sterilization:
Hot water at 175°F (80°C) at 5 psid for 30 minutes In-line steam at 257°F (125°C) @ 1 psid (0.07 bar) for 30 minutes Autoclavable at 257°F (125°C) for 30 minutes
FDA and USP Compliance:
All filters are manufactured of virgin polypropylene materials. All materials comply with FDA requirements for food contact per CFR Title 21 174.5, 177.1520 and 177.1630. All Components meet USP Class VI Plastics biological reactivity tests.