High-surface-area, large-diameter cartridges designed for high-flow water and general aqueous service. Single-cartridge format simplifies change-outs and reduces handling. Three body sizes support flow rates up to 150 GPM per cartridge.
Key Features
- Available micron ratings from 0.35 to 150 µm
- Large diameter, single-cartridge construction for fast installation and change-outs
- High media surface area to extend service life and improve total cost of ownership
- Polypropylene media, core, and end caps; thermally bonded construction
- Compatible with a wide range of potable water and aqueous industrial applications
- 20 µm and above may be washed and reused (when application-appropriate)
Typical Applications
- RO prefiltration
- Process water and wastewater
- Food & beverage and bottled water
- Swimming pools and spas
- Plating solutions
Micron Ratings
Offered pore sizes (µm): 1A, 0.35, 1, 5, 10, 20, 50, 100, 150
Dimensions and Surface Area
| Series | Nominal Length | Surface Area |
|---|---|---|
| 40 | 9 5/8" (24.5 cm) | 40 ft² |
| 90 | 19 1/2" (49.5 cm) | 90 ft² |
| 170 | 30 3/4" (78.1 cm) | 170 ft² |
Outside Diameter: 7 3/4" (19.68 cm)
Materials of Construction
| Component | Material |
|---|---|
| Filter Media | Polypropylene |
| Inner Core | Polypropylene |
| End Caps | Polypropylene |
| Gaskets | EPR standard; other options on request |
Operating Temperature Range: 40 °F (4.4 °C) to 140 °F (60 °C).
Recommended Change-Out ΔP: 20–25 psid (1.4–1.7 bar)
Maximum Flow Rates per Cartridge
| Micron | 40 Series GPM (LPM) |
90 Series GPM (LPM) |
170 Series GPM (LPM) |
|---|---|---|---|
| 1A | 20 (75.7) | 40 (151.4) | 80 (302.8) |
| 0.35 | 25 (94.6) | 50 (189.3) | 100 (378.5) |
| 1 | 30 (113.6) | 60 (227.2) | 120 (454.2) |
| 5 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
| 10 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
| 20 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
| 50 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
| 100 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
| 150 | 50 (189.3) | 100 (378.5) | 150 (567.8) |
Flow rates are per cartridge under clean conditions; actual performance depends on fluid properties and system design.
Ordering Guide
Build the code as: SJC – {Series} – {Micron}. Example: SJC-170-5
| Field | Options | Description |
|---|---|---|
| Model | SJC | Pleated jumbo cartridge |
| Series | 40, 90, 170 | Correlates to nominal length and surface area |
| Microns | 1A, 0.35, 1, 5, 10, 20, 50, 100, 150 | Pore size selection |
Pressure Drop Reference (Clean)
Use the flow vs. pressure-drop chart for initial sizing and verify in application
Notes
- Specifications are subject to change by the manufacturer without notice.
- Verify materials compatibility and regulatory requirements for your process before use.
Write a Review
Shelco
JUMBO CARTRIDGES – SJC SERIES