Skip to main content

Felt Filter Bags

Felt liquid filter bags from Custom Filtration Solutions (CFS) deliver dependable, economical filtration across industrial and commercial processes. Built from polypropylene, polyester, aramid, or PTFE felts, they combine high dirt-holding capacity with low pressure drop and broad chemical compatibility. Available in a full range of micron ratings and standard industry sizes, CFS felt bags remove both solid particles and gelatinous contaminants. Choose sewn or welded construction and ring or flange styles to match your housing and performance goals.

Quick Selector — Which Felt Should I Choose?

If you need… Choose Why
General-purpose depth filtration up to ~275°F PES (Polyester) Felt Stable at higher temps than PP; wide chemical compatibility; finish options reduce fiber shedding
Economical depth filtration up to ~180°F POG (Polypropylene) Felt Broad compatibility; popular for food contact builds; glazed finish lowers fiber migration
Elevated temperature service HT Aramid Felt Typical service to ~400°F (application dependent)
Maximum chemical resistance and temperature PTFE Felt Typical service to ~500°F (application dependent)

Key Features

  • Nominal micron ratings from 1 to 200 µm
  • Depth filtration media for long service life and high dirt-holding capacity
  • Sewn or fully welded construction (see welded notes below)
  • Handles available on ring-style bags
  • Multiple ring / flange styles for common housings (SH, SS, P, F, etc.)
  • Typical temperature ratings: POG 180°F, PES 275°F, HT 400°F, PTFE 500°F
  • Glazed / singed surface finishes to reduce downstream fibers
  • Silicone-free builds; PES/POG options available for FDA CFR21 contact

Micron Availability by Felt Material

“•” indicates common availability by media family.

Felt Material 1 3 5 10 25 50 75 100 200
Polyester (PES)
Polypropylene (POG)
HT Aramid    
PTFE    

Standard Bag Sizes & Dimensions

P2 provides roughly twice the filtration area of P1 for lower initial ΔP and longer runs. P3/P4 are compact for tight housings.

Bag Size Diameter Length
P1 7″ 16″
P2 7″ 32″
P3 4″ 8″
P4 4″ 14″
P5 4″ 14″
P7 5.5″ 15″
P8 5.5″ 31″
P9 8.5″ 16″
P11 8.5″ 32″
P12 7.3″ 16.5″
C1 7.3″ 16.5″
C2 7.3″ 32.5″
RP1 8″ 30″
RP2 8″ 40″
PC1 9″ 30″
PC2 9″ 40″
X1 4.3″ 8″
X2 4.3″ 14″
X01 6″ 22″

Ring & Flange Styles

Select a ring for ring-seat housings, or a plastic collar (flange) for positive-seal housings.

Code Description Construction
SH Galvanized Steel Ring Sewn
SS Stainless Steel Ring Sewn
P P Flange (plastic collar) Sewn or Fully Welded (P & F only)
F F Flange (plastic collar) Sewn or Fully Welded (P & F only)
T Titanium Ring Sewn
PP Polypropylene Ring Sewn
OSS CFS OSS Flange Sewn
DS Draw String Sewn
NR No Ring Sewn
E Santoprene® Collar (Note: Sewn Filters Only) Sewn

Options & Finishes

Code Option Notes
H Handle Standard on ring-style bags
EB Edge Binding Reinforced edge
A Auto Seam Automated seam finish
TTA Turn Top / Side / Auto Seam Special seam construction
RC Reverse Collar Special housing fit
MC Mesh Cover Outer mesh sleeve
WE Welded Construction Available for P & F flanges; eliminates needle holes to help prevent by-pass

How to Order (Part Number Build)

Format: [Media] [Micron] [Bag Size] [Ring/Flange] [Options]

Example: PES 25 P2 F WE

  • Media: PES (Polyester), POG (Polypropylene), HT (Aramid), PTFE
  • Micron: 1–200 nominal
  • Bag Size: P1, P2, P3, P4, etc. (see sizes table)
  • Ring/Flange: SH, SS, P, F, etc.
  • Options: H, EB, A, TTA, RC, MC, WE

Common Applications

Application Recommended Media Typical Microns
Paints / coatings / inks PES 5–100 µm
Food & beverage (low fiber shedding) POG 1–100 µm
Oils / resins / adhesives PES or POG 5–100 µm
Water polishing / general industrial PES or POG 10–100 µm
High-temperature process streams HT Aramid or PTFE 10–200 µm

Replacement Manufacturers (Liquid Filter Bags)

CFS provides direct-fit replacements for most major liquid filter bag brands. If your brand is not listed, send us your part number or a photo and we will cross-reference it.

Replacement Manufacturers
3M Parker Hannifin Strainrite FSI (Filter Specialists Inc.)
Hayward GE / Pentair Shelco Filters Eaton (LOFCLEAR / DURAGAF / GAF)
Meissner Amazon Filters Pall Corporation Global Filter
Other OEMs (contact CFS for cross-reference)

Need Help or a Quote?

A CFS filtration specialist can help you match the right felt media, micron, size, and ring/flange to your housing and process. Provide your current part number or bag dimensions to get started. Contact Custom Filtration Solutions.